408-754-4176 | info@reachtech.com

by Reach Technology
Support > Frequently Asked Questions > Connect a Display Module to a PC

Connect a Display Module to a PC

Here’s how to connect a G2C1/G2H2 module directly to a PC:

  • Plug debug cable into J1 on the module board and a USB port on the PC.
  • Plug the Ethernet cable into J3 on the module board and into the Ethernet port on the PC. Use a coupler if needed.

Windows 7/10 Setup

  1. Control Panel > Network and Internet > Network and Sharing Center > Change Adapter Settings
  2. Right-click on “Local Area Connection” or “Ethernet” and choose Properties.
  3. Double-click on Internet Protocol Version 4 (TCP/IPv4).
  4. Click “Use the following IP address” and enter the following:
    • IP Address: 192.168.0.5
    • Subnet mask: 255.255.255.0
    • Default gateway: Leave blank
  5. Click “Use the following DNS server addresses” and leave both fields blank.

G2Link Setup

  1. Network Setup > I’m using an Ethernet cable > I’m using a static address.


  2. IP Address: 192.168.0.100
  3. Subnet Mask: 255.255.255.0
  4. Default Gateway: 192.168.155.100