408-754-4176 | info@reachtech.com

by Reach Technology
Support > Frequently Asked Questions > Why doesn’t the module boot properly (jumper is in) from NAND?

Why doesn’t the module boot properly (jumper is in) from NAND?

If your module is running from NAND, you edited system files, and your module doesn’t boot properly from NAND anymore, you will have to restore the base image. This will delete any work you have done (sorry!). Insert the SD card with the image you want (see Software Releases) and remove the NAND boot jumper. Then use the View, Advanced View option of the G2Link program and click the Upgrade Flash button. When the update is finished, reinstall the jumper and power cycle. Then re-install your application to NAND.